Automatic presses



3M REMMELE

Specifications:

  • Aluminium tab for juice cans
  • Tooling: Ø50mm easy open
ID LACUEVA: 13798290
 
 



3M REMMELE

Specifications:

  • Aluminium tab for juice cans
  • Tooling: Ø52,5mm easy open
ID LACUEVA: 13798360
 
 



AIDA FT-4S

Specifications:

  • Force: 40Tn
  • Cursa: 120mm
  • Strokes per minute: 50-140
  • Speed: 160 pieces per minute
  • Max. drawing side: 40mm
  • Tooling: Ø45mm aerosol double top
ID LACUEVA: 23798515

Comments:

Transfer press
With curler
With electric pannel
Discs feeder

 



BIBRA ZSTN 50x550

Specifications:

  • Force 50Tn
  • Cursa 120mm
  • Speed 60-150 gpm
  • Tooling Ø99x28mmj
  • With pneumatic clutch
ID LACUEVA: 23709607
 
 



BLEMA AUE PKXD 63.3

Specifications:

  • Force: 63Tn
  • Cursa: 150mm
  • Speed: 115 gpm
  • Widt strip range: 135-370mm
  • Length strip range: 660-1000mm
  • Strokes per stripe 4-20 gpm
  • Tooling: Ø96,7 x 46mm
ID LACUEVA: 23711594
 
 



BLISS 1831

Specifications:

  • With double Bliss curler
  • Force 40Tn
  • With pneumatic clutch
  • Speed 300gpm
  • Tooling Ø52,5mm
ID LACUEVA: 23712613
 
 



BLISS 18P

Specifications:

  • Force 18Tn
  • Coil feeder
  • Tooling Ø73mm aluminum seal
ID LACUEVA: 23712569
 
 



BMV T-4

Specifications:

  • Force: 32Tn
  • Cursa: 100mm
  • 95 strokes per minute
  • Speed: 160 pieces per minute
  • Tooling: Ø52mm aerosol top
ID LACUEVA: 23798514

Comments:

Transfer press
With two curlers
disc feeder

 



BUSCETTO

Specifications:

  • Force: 25Tn
  • Pneumatic clutch
  • Max. band: 150x1000mm
ID LACUEVA: 13714464

Comments:

With control panel

 



BUSCETTO

Specifications:

  • Force: 40Tn
  • Pneumatic clutch
ID LACUEVA: 13714423
 
 



CAMERON 314

Specifications:

  • Double die diameter range: 60-124mm
  • Single die diameter range: 123-194mm
  • Ends per strip double die: 8-32mm
  • Ends per strip single die: 4-16mm
  • Speed: 115-429 strokes per minute
  • Long stroke: 50mm
  • Force: 30Tn
ID LACUEVA: 23715486

Comments:

With pneumatic clutch

 



CERLEI PA40/220

Specifications:

  • With pneumatic clutch
  • Force 40Tn
  • Strip width 70-240mm
  • Max length strip 1050mm
  • Strokes per strip4-16
  • Cursa 75mm
  • Max strip advance per stroke 240mm
  • End max diameter 230mm
  • Speed 300 gpm
ID LACUEVA: 23720591
 
 



CEVOLANI PA 08

Specifications:

  • Max. width strip: 140mm
  • Max. long strip: 800mm
ID LACUEVA: 23721498

Comments:

With pneumatic clutch
With electric pannel

 



CEVOLANI PA 72

Specifications:

  • Force 30Tn
  • Max stripe 150x1050mm
  • Max speed 400 gpm
ID LACUEVA: 23721611
 
 



CEVOLANI PA-72

Specifications:

  • Force: 30Tn
  • Max. width strip: 150mm
  • Mas. long strip: 1050mm
  • Max. speed: 400gpm
  • Tooling: Ø42mm aerosol bottom
ID LACUEVA: 23721516
 
 



CEVOLANI PD90

Specifications:

  • Force 45Tn
  • Width stripe range 55-240mm
  • Lencht stripe range 450-1050mm
  • Speed range 3-24gpt
  • Cursa 80mm
  • Max diameter double cut 122mm
  • Speed 250 strokes min
  • Tooling Ø150mm
ID LACUEVA: 23721606

Comments:

With mechanic clutch
With streep feeder
Cursa 90mm

 



CEVOLANI PD90

Specifications:

  • Force 45Tn
  • Cursa 80mm
  • Min and max strip width 55-240mm
  • Min and max strip lenght 750-1170mm
  • Strokes per stripe 3-24
  • Speed 150-250 gpm
  • Tooling Ø153,3mm
ID LACUEVA: 23721588

Comments:

With pneumatic clutch


UNDER OPTION

 



CEVOLANI PD90

Specifications:

  • Force: 45Tn
  • Strip width range 55-240mm
  • Strip lenght range 450-1050mm
  • Stroke per strip range 3-24 gpt
  • 80mm
  • Max diameter double cut 122mm
  • Speed 250 gpm
ID LACUEVA: 23721601

Comments:

With pneumatic clutch

 



CEVOLANI PI 90

Specifications:

  • Force 45Tn
  • Cursa 115mm
  • Max cut diameter 235mm
  • Width stripe range 55-240mm
  • Heigh stripe range 750-1170mm
  • Strokes per stripe 3-24
  • Speed 70-13 gpm
ID LACUEVA: 23721598

Comments:

With pneumatic clutch

 



FMI-MECFOND 1221

Specifications:

  • Force: 30Tn
  • Speed: 200strokes/min
  • Stroke: 85mm
  • No tooling
ID LACUEVA: 13729474
 
 



FMI-MECFOND 1221

Specifications:

  • Force: 30Tn
  • Speed: 200strokes/min
  • Stroke: 85mm
  • No tooling
ID LACUEVA: 23729492
 
 



FMI-MECFOND 1221

Specifications:

  • Force: 30Tn
  • Speed: 200strokes/min
  • Stroke: 85mm
  • Tooling: No
ID LACUEVA: 13729231
 
 



FMI-MECFOND 1221

Specifications:

  • Force: 30Tn
  • Speed: 200strokes/min
  • Stroke: 85mm
  • Tooling: Ø99mm
ID LACUEVA: 13729481
 
 



FMI-MECFOND 1221

Specifications:

  • Force: 30Tn
  • Speed: 200strokes/min
  • Stroke: 85mm
  • No tooling
ID LACUEVA: 13729237
 
 



FMI-MECFOND 1221

Specifications:

  • Force: 30Tn
  • Speed: 200strokes/min
  • Stroke: 85mm
  • Tooling: No
ID LACUEVA: 23729578

Comments:

With curler

 



FMI-MECFOND A-707

Specifications:

  • Force 60Tn
  • Diameter range Ø70-225mm
  • Max strip length 260x850mm
  • Speed 180gpm
  • Tooling Ø150mm and Ø214mm
  • With pneumatic cluthc
ID LACUEVA: 23729605
 
 



INCOME/ZAGO PAT 45

Specifications:

  • Force 45Tn
  • Max diameter simple cut 180mm
  • Max diameter double cut 65-125mm
  • Widht stripe range 120-240mm
  • Lengh stripe range 500-1050mm
  • Speed 150-350 gpm
  • Tooling Ø109mm double bottoms
ID LACUEVA: 23775597
 
 



KARGES HAMMER ASTS 200/2

Specifications:

  • Force: 30Tn
  • Speed: 300strokes/min
  • Stroke: 65mm
  • Central lubrication
  • Pneumatic clutch
  • No tooling
ID LACUEVA: 13734392
 
 



KARGES HAMMER ASTS 200/2

Specifications:

  • Force: 30Tn
  • Speed: 300 strokes/min
  • Stroke: 65mm
  • Central lubrication
  • No tooling
ID LACUEVA: 13734151
 
 



KARGES HAMMER ASTS 200/2

Specifications:

  • Force: 30Tn
  • Speed: 300strokes/min
  • Stroke: 65mm
  • Central lubrication
  • No tooling
ID LACUEVA: 13734153
 
 



KARGES HAMMER ASTS 226/2

Specifications:

  • Force: 40Tn
  • Speed: 160gpm
  • Stroke: 75mm
  • Pneumatic clutch
  • Tooling: Ø153mm
ID LACUEVA: 23734489
 
 



KARGES HAMMER ASTS 230

Specifications:

  • Pneumatic clutch
  • Force: 40Tn
  • Speed: 300strokes/min
  • Stroke: 75mm
  • No tooling
ID LACUEVA: 13734450
 
 



KARGES HAMMER ASTS226

Specifications:

  • Force: 30Tn
  • Speed: 200gpm
  • Cursa: 90mm
  • Pneumatic clutch
  • Tooling: Ø79mm dome
ID LACUEVA: 23734602

Comments:

With Naroska NVSP feeder
With pneumatic clutch

 



KARGES HAMMER ASTW-226/2

Specifications:

  • Mecanic clutch
  • Coil feeder
  • Force: 50Tn
  • Speed: 220strokes/min
  • Stroke: 150mm
ID LACUEVA: 13734009
 
 



KARGES HAMMER PNS 210

Specifications:

  • Pneumatic clutch
  • Force: 30Tn
  • Speed: 280strokes/min
  • Stroke: 50mm
ID LACUEVA: 23734484

Comments:

Modified Cevolani type stripe feeder

 



KARGES HAMMER PNS 210

Specifications:

  • Pneumatic clutch
  • Force: 30Tn
  • Speed: 350strokes/min
  • Stroke: 50mm
ID LACUEVA: 13734348
 
 



KARGES HAMMER PNS 210

Specifications:

  • Pneumatic clutch
  • Force: 30Tn
  • Speed: 350strokes/min
  • Stroke: 50mm
ID LACUEVA: 13734321
 
 



KARGES HAMMER PNS 210

Specifications:

  • Pneumatic clutch
  • Force: 30Tn
  • Speed: 350strokes/min
  • Stroke: 50mm
ID LACUEVA: 13734312
 
 



KOMET

Specifications:

  • Force: 25 Tn
ID LACUEVA: 23736502

Comments:

With pneumatic clutch
With electric pannel

 



LOMAS

Specifications:

  • Force: 30Tn
  • Speed: 100strokes/min
  • Tooling: double Ø71,5mm
ID LACUEVA: 13741283
 
 



LOMASA PA60

Specifications:

  • For draw can
  • Force 60Tn
  • Tooling Ø99x28mm
  • With pneumatic clutch
ID LACUEVA: 23741608
 
 



MANZONI RAF

Specifications:

  • Force 60Tn
  • Table size 750x420mm
  • Cursa 90mm
  • Cleavage 340mm
  • Pneumatic clutch
  • Speed 65gpm
ID LACUEVA: 23798583

Comments:

With strip feeder

 



MERITERMICA PP-40T

Specifications:

  • Pneumatic clutch
  • Force: 40Tn
  • Speed: 300strokes/min
  • Stroke: 85mm
  • Tooling: double Ø73mm
ID LACUEVA: 13745346
 
 



MERITERMICA PP-40T

Specifications:

  • Pneumatic clutch
  • Force: 40Tn
  • Speed: 300strokes/min
  • Stroke: 85mm
  • Tooling: double Ø52,5mm
ID LACUEVA: 13745345
 
 



NAROSKA NE-R-TOPIT-300-174

Specifications:

  • Transfer Press
  • 3 operation plus liner
  • With pneumatic clutch
  • With electric pannel
  • Tooling: Ring Ø99mm (milk powder)
  • Speed 300cpm
ID LACUEVA: 23748596

Comments:

CONVERSION PRESS AND LINER
Speed up to 300 strokes per minute. Transfer pitch 140mm. Process operations are: - Cutting, pre-drawing and oiling - Skirt drawing - Inside reverse curling - Compound lining. Year of Manufacture: 2003. Set for the conversion and lining of 99mm diameter plain panel tinplate ends into rings for penny lever assemblies (paint can rings, etc.). Manufactured by Naroska for a UK can maker and used in production for less than six years. Samples and specifications are available upon request.

 



NAROSKA STAI 4ST

Specifications:

  • Force 40Tn
  • Max stripe 320x1200mm
  • Cursa 80
  • Speed 150gpm
  • With pneumatic clutch
ID LACUEVA: 23798604
 
 



NAROSKA STAI-4ST

Specifications:

  • Force 40Tn
  • Cursa 80mm
  • Max stripe 320x1200mm
  • Speed 150gpm
  • With pneumatic clutch
ID LACUEVA: 23748603
 
 



OSAI

Specifications:

  • Force: 30Tn
  • Tooling: square 50mm
ID LACUEVA: 13798452
 
 



SCHULER ATS 200/2

Specifications:

  • Force: 30Tn
  • Speed: 300strokes/min
  • Stroke: 65mm
  • Central lubrication
  • No tooling
ID LACUEVA: 13761049
 
 



SCHULER X-150

Specifications:

  • Force: 150Tn
  • Speed: 150strokes/min
  • Stroke: 315mm
ID LACUEVA: 13761208

Comments:

Drawing press for aluminium cans

 



 

LACUEVA CAN MAKING MACHINERY, S.L. uses cookies to facilitate browsing the web.
To learn more about our use of cookies, please see our Cookies Policy.
If you do not accept, you change the settings of your browser.